COATS Kit 85000440, Lift Accessory - Manual (Page 3)

5. Remove three bolts from transmission as shown
above. Reserve bolts for later use.
6. Place lift mounting bracket on chassis and align on
the three holes.
7. Install lift mounting bracket to chassis using the
three reserved transmission bolts.
Important: Torque bolts at 30 foot pounds.
8. Install tire lift on tire changer using six fasteners
(three on each side into lift bracket/chassis).
9. Attach pedal guard to the lift, as shown above.
10. Disconnect output air line from filter lubricator
assembly. Now run air line from wheel lift to back of
tire changer. Attach wheel lift airline with tee fitting into
output side of filter lube unit as shown. Reattach out-
put air line at tee fitting.
Note: If necessary, use Teflon™ tape or equivalent on
threaded fittings.
11. Functional test the wheel lift.
Replace
Three Bolts
Attach Foot
Pedal Brow
Wheel Lift Airline Into
Output Side Filter Lube
Reattach
Output
Airline
At Tee
Remove
Three Bolts
COATS Wheel Lift Kit • 3