Comelit FT SB 08 - Manual (Page 22)

GROUP S.P.A.
FT SB 08 20
2) INSTALLATION OF THE MODULE
Follow what is indicated in technical sheet FT/SB/07 or MT/SB2/02 to cable module
Art. 3340.
To prevent any interference caused by electrostatic discharges, it is advisable to
screen the casing as shown in the diagram CA/EN/108.
3) ACCESSING THE CONFIGURATION STAGE
Powered up with PR
terminal connected
to terminal - .
Or
During normal
operation press
,
insert the supercode
and confirm
pressing .
The module is in
programming mode:
to select the menu
▲▼ to scroll the menus.
to return to the
previous menu.
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
INITIAL CONDITION
4) SETTING THE LANGUAGE
4A) THE FIRST TIME THE MODULE IS TURNED ON,
THE LANGUAGE HAS NOT YET BEEN SELECTED:
On power up SELECT LANGUAGE:
*ITALIAN
ENGLISH
Scroll the list by means
of the
▲▼ keys.
To select the language
required, press
* ITALIANO
ENGLISH
FRANCAIS
The DEFAULT
item sets the
ITALIAN language.
The next time the
module is turned on,
selection of the language
is requested again.
ON DISPLAY DESCRIPTION OPERATION
4B) CHANGING THE LANGUAGE SET PREVIOUSLY:
Access to the configuration
stage has been carried out
(See point 3) NAME DIRECTORY
ACCESS CONTROL
SETTINGS
SELECT LANGUAGE:
*ITALIAN
ENGLISH
SELECT LANGUAGE:
ITALIAN
*ENGLISH
The default language
on power up is Italian.
The language set
is marked by an asterisk
on the left-hand side.
When repowered
the lanuage resets
to Italian by default.
Select the
SETTINGS /
SELECT LANG. menu
Scroll the list by means
of the
▲▼ keys.
To select the language
required, press
ON DISPLAY DESCRIPTION OPERATION
ON DISPLAY DESCRIPTION OPERATION