Comelit FT SB 08 - Manual (Page 25)

FT SB 08
23 FT SB 08
E
N
G
L
I
S
H
INITIAL CONDITION
8B) ENTERING BY MEANS OF ART. 1230
(not available if the call mode is In direct Code - see point 9)
Press the NAME->
of Art.1230.
Enter the user name
to be inserted.
EXAMPLE:
SMITH JOHN
Press the ENTER key
of Art. 1230.
During normal operation.
If some users have been
stored in the directory.
ENTERING
A NAME
SMITH JOHN
CODE: _ _ _
To use the lower-case
characters of the keys, press
SHIFT. To cancel the
character on the left press < .
To enter special characters,
press the combination of
keys described below:
NAME -> + A = Å
NAME -> + B = Ä
NAME -> + C = ß
NAME -> + O = Ö
NAME -> + P = Ø
NAME -> + Q = Ü
Press ESC to cancel
the user name
entry operation.
ON DISPLAY DESCRIPTION OPERATION
ENTER TENANT
CODE
Followed by:
SCROLL NAMES
SEARCH NAME
Enter the user name.
EXAMPLE: 1
Press the ENTER key
of Art. 1230 to store the
user name and code.
It is possible to proceed
to enter other users.
ON DISPLAY DESCRIPTION OPERATION
CODICE: _ _ 1
STORING
IN PROGRESS….
INITIAL CONDITION
8C) ENTERING BY MEANS OF SOFTWARE ART.1249/A
Run the software Art.1249/A.
Consult the online Guide of
the products for the settings
required. Press the F7 key to
start downloading.
CAUTION:
The call mode selected must
correspond with the one set in
module Art. 3340.
(see point 9).
On completion of downloading.
During normal operation..
Connect the cable combined
with ART. 1249/A to the TX /
RX / - terminals. Module
3340 and 3342 must not be
under programming.
Or:
DOWNLOAD
FAILED
DOWNLOAD
TERMINATED
If downloading is taking
place correctly.
If there are connection
problems.
The directory must be
empty.
ON DISPLAY DESCRIPTION OPERATION
ENTER TENANT
CODE