Comelit FT SB 08 - Manual (Page 31)

FT SB 08
29 FT SB 08
E
N
G
L
I
S
H
10C) SETTING THE ID CODE ( Default = 0 )
The ID code is only used in special applications.
Select the SETTINGS /
SYSTEM PARAMETERS /
RS485 ADDRESS menu
Press the key to
confirm the selection.
Use the ▲▼ keys
to modify the value
of the ID code
Press the key to store
the value.
Access to the configuration
stage has been carried out
(see point 3),
RS485 ADDRESS: 01
RS485 ADDRESS: 01
RS485 ADDRESS: 254
PARAMETER
CHANGED
The ID code displayed is
not the one configured.
The ID code displayed
is not the one configured.
The code can have a value
from 1 to 255.
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
ON DISPLAY DESCRIPTION OPERATION
11B) CHANGING THE SUPERCODE ( Default = 778899 )
Select the ACCESS
CONTROL /
SUPERCODE /
ENTER NEW ONE menu.
Enter the
new supercode.
It must have 6 figures.
Press the key to
confirm the entry.
Access to the configuration
stage has been carried out
(see point 3), NAME DIRECTORY
ACCESS CONTROL
SETTINGS
NEW SUPERCODE:
_ _ _ _ _ _
NEW SUPERCODE:
* * * * * *
SUPERCODE
CHANGED
Or:
SUPERCODE
WRONG
ON DISPLAY DESCRIPTION OPERATION
11) MANAGEMENT OF THE ACCESS CONTROL FUNCTION
11A) DEFAULT SUPERCODE
The supercode allows access to the configuration stage
11C) RESETTING THE SUPERCODE
Select the ACCESS
CONTROL / SUPERCODE /
DELETE menu
Access to the configuration
stage has been carried out
(see point 3),
SUPERCODE
CHANGED
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
ON DISPLAY DESCRIPTION OPERATION