Bissell PowerSteamer 1693 series - Manual (Page 8)

8
Check manufacturer’s tag before cleaning. A "W" or "WS" on
the tag means you can use your PowerSteamer. If the tag is
coded with an "X" or "S" (with a diagonal strike through), or
says "Dry Clean Only," do not proceed. Do not use your
PowerSteamer on velvet or silk. If manufacturer’s tag is
missing or not coded, check with your furniture dealer.
Check for colorfastness in an inconspicuous place.
If possible, check upholstery stuffing. Colored stuffing may
bleed through fabric when wet.
Plan activities to give upholstery time to dry.
Vacuum thoroughly to pick up loose debris and pet hair. Use a
vacuum with a brush attachment and a crevice tool to clean in
fabric folds and tufts.
Set up the machine following instructions in The Basics section,
pages 5-7.
Using the Measuring Cup provided, pour BISSELL Advanced
Deep Cleaning Formula into the Tank-in-Tank.
Set the ReadyTools Dial to TOOLS/PRETREAT.
Turn Power Switch OFF.
Unplug Power Cord from outlet and coil cord around Power Cord
Quick Release.
Remove and rinse tools, if used, in clean, running water. Dry
and replace.
Coil Flex Hose through storage brackets.
Remove Tank-in-Tank. Dispose of dirty water. See The Basics
section, page 6.
Rinse out Tank-in-Tank and reseat the tank unto the machine.
Wipe all exterior surfaces with a soft cloth.
Store cleaner in a protected, dry area.
How To Clean Upholstery and Small Areas
1.
2.
3.
4.
Adsdf dd gh g bvh cvbbj jkn hnbj jkvh gcghh jj j hffhl kllg h
1.
2.
3.
Important - Check Upholstery Tags
5.
Machine Preparation
Manufacturer’s Tag
Maintenance/Storage
Power Cord
Quick
Release
Flex Hose
Storage
Bracket
1.
2.
3.
4.
5.
CAUTION:
PowerSteamer TM
uses water and
must not be stored
where there is a
danger of freezing.
Freezing will
damage internal
components and
void the warranty.
6.
7.
8.