CounterPath Bria 3.3 for Windows User Guide - Enterprise Deployments - Manual (Page 64)

CounterPath Corporation
60
SIP Account Properties – Presence
This tab lets you configure presence and workgroups.
Presence
Set up the Presence section as instructed by your system administrator.
Once you have configured presence on this page, you can set up rules for which people are allowed to see
you;“Preferences – Privacy” on page 68.
Setting up Workgroups in RLS Mode
Read this section if your system administrator advises you that workgroups are already set up on the server.To
configure workgroup on your Bria:
• Set the Mode to RLS and enter the server address (obtained from your system administrator).
• If you want other members of the workgroup to be able to monitor you, check the Allow others field.
Leaving this field unchecked does not prevent you from seeing other people, it only prevents other people
seeing you.
Setting up Workgroups in Peer-to-Peer Mode
Read this section if your system administrator advises you that you must set up your own workgroup in “peer-
to-peer” mode.
In this mode, you add people who you want to share with. Typically, everyone in a group will informally agree
to add each other to their group so that everyone’s setup contains the same workgroup members.
1. Set the Mode to Peer-to-peer.
2. Select the monitoring method:
• Allow anyone to monitor my call activity: if you want everyone in the workgroup to monitor you.
Normally, you choose this mode.