Dascom MIP480 User Guide - Manual (Page 36)

Using Special Mode
4-2
Entering Special Mode
To enter Special mode:
1 Make sure that the tractors are loaded with continuous feed paper and that the paper
select lever is set backward.
2 Turn the printer off.
3 Turn the printer back on while pressing each keys.
Function
Load/
FF
Park Alt
Ready/
Clear
Setup Mode
•
Print Configuration
•
Printing Test
•
Hex Dump Mode
• •
Printing Alignment Adjustment
• •
Top Adjustment
•
Setting of The First Dot Position on The Left
Side
• • •
Menu-Access
• • •
Setting Setup Mode to Default Value (Stan-
dard)
• •
Setting Setup Mode to Default Value (6820)
• •