Dascom MIP480 User Guide - Manual (Page 46)

Using Special Mode
4-12
ROMAN ROMAN font
SANS SERIF Sans Serif font
SCRIPT Script font
BOLD Bold font
GOTHIC Gothic font
PRESTIGE Prestige font
ORATOR ORATOR font
OCR-A OCR A font
OCR-B OCR B font
<HORIZONTAL PITCH>## CPI 10,12, 15, 17, 20 or 24
(characters per horizontal inch)
<VERTICAL PITCH>## LPI 1,2, 3, 4, 5, 6, 7, 8, or 12
(lines per vertical inch)
## LPCM 1, 2, or 4
(lines per centimeter)
<FORM LENGH> Specify the length of the page in inches or by the number
of lines per page.
## INCHES 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11 (Letter size), 11 2/3 (A4 size),
12, 14, or 15
No of LINE 1 to 126 (66)
Number of lines per page
<LEFT MARGN> Specify the left margin by the number of the left column
(see “Print Area Definition” in Chapter 2, “Paper Handling.”
No of COLM 1 to 256
Number of the left column
<TOP OF FORM> Specify the top of form in 1/60 inches. See “Print Area Def-
inition” in Chapter 2, “Paper Handling.”
## /60 IN 0 to 99
Number of 1/60 inches
<IGNORE FF> Specify whether to ignore a form feed when the current
position is at the top of a form.
NO
YES
Always perform a commanded form feed.
Ignore the form feed when at the top of a form.
<TOP MRGIN> Specify the number of the top line. See “Print Area Defini-
tion” in Chapter 2, “Paper Handling.”
## LINES 1 to 126 (66)
<BOTTOM MRG> Specify the number of the bottom line. See “Print Area Def-
inition” in Chapter 2, “Paper Handling.”
## LINES 1 to 256 (66)
Number of the bottom line
MACRO Options Description