Dascom T2150 User Guide - Manual (Page 138)

Emulations User guide
128
List of available control
codes
The following table shows sequences marked by a if they are
available in the various emulations. The MTPL sequences can be
used within all emulation modes. The corresponding sequences are
marked by a .
If you want to know more about control codes, we recommend
our
Programmer’s Application Manual on this CD-ROM.
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
<BEL> Signal tone
<BS> Control character BS (Backspace)
<CAN> Deleting a data line
<CR> Control character CR (Carriage return)
<CSI> Start character for MTPL sequences, corr. ESC [
<DC1> Selecting the printer
<DC2> Condensed printing OFF (set by <Sl> or <ESC><Sl>)
<DC3> Deselecting the printer
<DC4> Double-wide printing OFF (set by <SO> or <ESC><SO>)
<DEL> Delete line. Epson: Delete last character
<ESC> Start character for programming sequence
<ESC>!<n> Print mode selection
<ESC># Bit 8 = unchanged
<ESC>$<n1><n2> Perform absolute horizontal step
<ESC>%<0><0> Select ROM character generator
<ESC>%<1><0> Select download generator
<ESC>%1<n1><n2> Graphics print with 180 dpi/HQ
<ESC>%2<n1><n2> Graphics print with 360 dpi/HQ
<ESC>%3<n1> <n2> Graphics print with 60 dpi
<ESC>%4<n1> <n2> Graphics print with 120 dpi
<ESC>%5<n1> <n2> Graphics print with 80 dpi
<ESC>%7<n1> <n2> Graphics print with 240 dpi
<ESC>%8<n1> <n2> Graphics print with 72 dpi
<ESC>%9<n1><n2> Graphics print with 90 dpi
<ESC>&<s><x><y>.. Define download character
<ESC>(& Character set ISO 8859-2
<ESC>(* Character set ISO 8859-5
<ESC>(+ Character set ISO 8859-1 SAP