Dascom TallyCom III Getting started with PrintGuide - Manual (Page 10)

Introduction
Getting Started with PrintGuide
TM
10
1.5 Info Viewer
If you right-click the mouse on the highlighted PrintServer and select the
menu item Show Info Viewer, a window will be displayed giving you
useful information about the selected PrintServer. You can also select
Show Info Viewer on the menu Options.
Figure 7, PrintServer Info Viewer
1.6 Discovery preferences
If PrintGuide is unable to discover a PrintServer and the PrintServer is
otherwise running (powered on), it may be because the discovery
preferences need to be changed.
1. On
the Options menu, click Preferences.
2. Click the Network tab (See Figure 8 ).
3. Enable DLC and/or TCP/IP protocol.
4. Edit the corresponding protocol settings, as you require.