Dascom TallyCom III Getting started with PrintGuide - Manual (Page 6)

Introduction
Getting Started with PrintGuide
TM
6
1.4.2 Monitor filters
With this feature, you can define a list of filters to limit the number of
PrintServers shown in the Monitor View. Filters can show device
addresses within a certain range, all devices with a common part of a
name, or all devices that are not ready etc. To define a filter, do the
following:
1. Press the Monitor Filter Preferences button , or click
Preferences on the Options menu.
A dialog is displayed asking you whether you want to import a few
demonstration filters that illustrate how you can use filtering. If you
select Yes (they can be removed later), the Preferences dialog’s
Monitor Filters tab is displayed as shown in
Figure 3 :
Figure 3
2. Press the New button.
The Monitor Filters tab changes to let you define a new filter; see
Figure 4 .
3. Enter a Filter name and (if you want) a Description.