Drive status indicator – ElmoMC Gold Line Digital Servo Drives-Gold DC Whistle User Manual
Page 31
Gold DC Whistle Installation Guide
MAN-G-DCWHIIG-EC (Ver. 1.700)
||Drive Status Indicator
31
6.4. Drive Status Indicator
Figure 15 shows the position of the red/green dual LED, which is used for immediate indication of
the Initiation and Working states. For details refer to Chapter 7 Drive Status Indicator, in the
MAN-G-Panel Mounted Drives Hardware manual.
Figure 15: Drive Status Indicator - EtherCAT
Figure 16: Drive Status Indicator - CAN
The red/green dual LED is used for immediate indication of the following states:
•
Initiation state: In this state the LED indicates whether the drive is in the boot state
(blinking red) or in the operational state (steady red).
•
Working state: In this state the LED indicates whether the drive is in an amplifier failure
state (red) or is ready to enable the motor (green).