ETC Source Four LED v1.6.0 User Manual - Manual (Page 70)

64 Source Four LED Profile v1.6.0 User Manual
Individual Control (Ind Cntl)
Use Individual Control to select each LED series and then adjust its intensity.
Step 1: On the Test screen, scroll to Action.
Step 2: Press [ ]until the Ind Cntr option displays.
One of the LED series will illuminate.
Step 3: Press [ ]to select the series.
Figure-3.35 Test Screen in Individual Control Mode.
Step 4: Press [ ]or [ ] to set the intensity of the series.
Step 5: Press [ ] to move to the next series.
The value you entered for the first series is applied to the next series.
Step 6: Press [ ] or [ ] to change the intensity of the series.
Step 7: Press [ ] to return to Action.
Diagnostics
Individual Control
Test
Action: Ind Cntr
Chase: 15 steps/sec
G O R A O R I
56 00 00 00 00 00 00