ETC Alex M Alex MX - Manual (Page 50)

Menu page 4: Basic settings The menu pages
– 50 –
Alex M
030430-150B
Alex_M_E_150C_A5.doc
Input/display fields (continued)
MEMORY TIME Fade-in time for preset XX if the DMX signal fails
FREQ Display of mains frequency
Display only. This is not an input field and cannot be
addressed with the knob.
INPUT Source of the dimmer control signals
Dmx DMX signal only
Analog Analog signal only
Mem/Chase Stored presets or chases only
Dmx + Mem/Chase DMX signal and stored
presets/chases
Analog + Mem/Chase Analog signal and stored
presets/chases
Ana+Dmx+Mem/Chase Analog signal, DMX signal and
stored presets/chases
Factory setting: Dmx + Mem/Chase
ANA-MIN Minimum value for output level through analog signal in
percent. Below this value: output = zero.
Value range:
Factory setting: 5 to 10
5
CLEAR
MEM/CHASE
_Yes_ + [Save] reset all parameters that affect stored
presets and the chaser function to the factory settings.
In particular, all stored presets are reset to zero. For a
list of the factory settings, see page 58.