ETC Alex M Alex MX User Manual
Page 58

List of factory
settings
Appendix
– 58 –
Alex M
030430-150B
Alex_M_E_150C_A5.doc
List of factory settings
RESET DEVICE on menu page 4, Basic Settings, allows you to reset all
the settings on your dimmer system to the factory settings. The menu
pages Parameters and Memory/Chaser offer reset functions that only apply
to certain settings.
Size
Value
DMX start address
1
Behavior if DMX signal fails
Hold
Fade-in time after DMX failure
0.5 s
Signal source
DMX + Memory/Chaser
Minimum analog output
5 %
Fade-in time for intensity increments
40 ms
Dimmer control
on
Max. output voltage
230 V
Menu language
English
Display contrast
75 %
Manual output control for all channels
0 %
All stored presets
deleted
All preheat output levels
0 %
All output limits
100 %
Dimmer curve for all channels
linear
Non-Dim switching threshold
10 %
Weighting factor for all presets
0 %
Chaser fade-in time
0.0 s
Chaser wait time
1.0 s
Chaser sequence
1 2 3 ... 12