ETC SmartPack CE Wall Mount - Manual (Page 8)

6 SmartPack Wall Mount Installation Manual
Compliance
CE Compliance
• EN55015, EN55022B, EN61000-6-2, EN60439-1
• Complies with CE Directives 336/83/EEC and 73/23/EEC
Verify the Contents of the Shipping Carton
• SmartPack unit with cover attached.
• Warning labels. If necessary replace the warning label on your SmartPack unit with the
label displaying the operational language of the installed location.
• SmartPack User Manual and Mounting Template.
• DMX Cable Preparation Kit with 8-pin connector (4100A1012).
Additional Parts and Specialty Tools Required
• 4 x 6-8mm (1/4” - 3/8”) bolts or screws, 50-100mm (2 - 4”) long, and suitable wall plugs,
are suggested. Mounting hardware and surface must support 23kg (50 lbs).
• Conduit punch, Conduit or bushes 12.7mm (1/2”) diameter
• Slotted screwdriver for line terminals
• Phillips screwdriver
• 4.75mm (3/16”) wide slotted-style screwdriver for load terminals
• Jeweler’s screwdriver for data terminals
• Wire strippers