EUCHNER CIS3A-Mini - Manual (Page 17)

EUCHNER Identsystem CIS3A-Mini
084727-01-02/03 Subject to technical modification Page 17 / 22
5.2 Example, how to read a data carrier read-only
The DIP switch of the evaluation unit has to be set to data carrier read-only prior to power on
(see chapter 2.4.1).
Data carrier no. 1 in active range:
Command telegram to read the data carrier read-only:
07 T L 01 00 00 05
Response telegram:
12 R L 01 00 00 05 X1 X2 X3 X4 X5
(X1 - X5 = data)
Data carrier no. 2 in active range:
Command telegram to read the data carrier read-only:
07 T L 01 00 00 05
Response telegram:
12 R L 01 00 00 05 X1 X2 X3 X4 X5
(X1 - X5 = data)
And so on...
6 Command overview
Description Command telegram Response telegram
Program data-carrier (number of telegram bytes)
TP
(read/write head address)
(start address)
(number of bytes user data)
(user data) (number of telegram bytes)
RF
(read/write head address)
(status no.)
Read data-carrier (number of telegram bytes)
TL
(read/write head address)
(start address)
(number of bytes user data) (number of telegram bytes)
RL
(read/write head address)
(start address)
(number of bytes user data)
(user data)
or
(number of telegram bytes)
RF
(read/write head address)
(status no.)