EUCHNER CIS3A-Mini - Manual (Page 5)

EUCHNER Identsystem CIS3A-Mini
084727-01-02/03 Subject to technical modification Page 5 / 22
Functions of the DIP switches
Switch Functions Default settings
1-1 (1) OFF=9600 Baud or ON=28800 Baud OFF 9600 Baud
1-2 (2) OFF
1-3 (3) OFF
1-4 (4) OFF
2-1 (5) OFF
2-2 (6) OFF
2-3 (7) OFF
2-4 (8) ON= Data carrier read-only
OFF= Data carrier read/write OFF Data carrier read/write
General note:
All presently un-used switches must be set “OFF”. Thus, possible problems can be avoided with
functions which may be added in the future.
2.4.2 Interface setting
For the pre-setting of the interface type, the rotary switch "S3" is responsible.
Default setting is RS232
Switch position 1 Switch position 3
RS232 RS422