Ewbank Floor Scrubber & Polisher with Vac FP1000 - Manual (Page 7)

7
• Ensure that the scrubbing brushes are
attached to the product (see page 5).
• To turn the machine on, select setting II
(scrubbing and vacuuming).
• With your foot securing the head on the floor,
pull the handle towards you and the machine
will start (Fig.9).
• Move the machine slowly across the surface
of the floor to loosen and collect any debris.
• Collect large debris towards the centre of the
base unit to prevent it from being spread
across the floor.
• If during this process the dust container
becomes full of debris, please empty as
described below.
• Once this is complete, turn the machine off
before returning it to its upright position.
Emptying the dust container
• To remove the dust container, depress the
button at the top of the unit and gently pull it
towards you and then upwards (Fig.10).
• Hold with opening lid upwards.
• Slide lock across to open lid (Fig.11).
• Remove blue part (Fig.11-3).
• Empty debris into a trash can.
Scrubbing /Cleaning the floor
Fig.9
Fig.10
Fig.11
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 7