Ewbank Floor Scrubber & Polisher with Vac FP1000 - Manual (Page 9)

Cleaning the floor pads
• All pads and floor attachments are washable.
• The brushes, polishing pads and scouring
pads can be washed under the tap with warm
soapy water.
• The vacuum and polishing units are not
suitable for washing in water, they must be
wiped with a damp cloth.
Technical Data
Power 1000W
Voltage 120V~
Current 8.5A
Frequency 60Hz
Rpm 2100
Vacuum 18 kPa
Troubleshooting
• Loss of vacuum suction?
- Check dust container is emptied.
- Check dust filter is clean.
• Smeary marks are made on floor when
polishing
- Has the polish/wax been allowed to dry?
- Does old polish/wax need to be removed?
• No gloss sheen is being produced
- Floor wax level may need to be increased, try
another coat. Allow to dry and re-polish.
- However, some types of floor do not produce
gloss finish.
• Scratches are made on the floor
- Check for grit or dirt stuck to the pads or
wheels.
- Clean/replace pads or clean wheels.
• Floor is too slippery
- Check the polish/wax is designed to be used
on floors. Floor wax should produce a glossy
but grippy finish.
9
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 9