EZWatch Pro 4.0 - Manual (Page 23)

22 | Page Software User Manual
Fig. 25. Select Event window
Record On Motion Select this option to start recording when there is motion detected. To detect
motion, you have to define a detection zone. Left-click and drag the mouse to draw a detection
zone. You may define more than one zone on the screen by repeating the same process. User can
also click on the All button to select the entire detection zone.
Sensitivity This slider determines the amount of motion needed to activate the recording.
Frame Interval This slider determines the number of consecutive frames or motion needed to
activate the recording.
Rectangle Count When drawing your detection zone, you are limited to 10 individual rectangle
zones.
All/Clear/Default These buttons are used to select the entire detection zone, clear the detection,
and set the Sensitivity and Frame Interval back to the Default settings.
Fig. 26. Video Encoder field set of Encoding Options
window
Frame Rate This slider allows you to adjust how many frames per second (FPS) the software will
record. The higher the frame rate, the smoother and more fluid the video will be, but the file size