EZWatch Pro 4.0 - Manual (Page 56)

Page | 55 Software User Manual
IP Field This allows you to add addresses to either list. Enter the same address in both fields if you
want to block a single address. Otherwise, enter a starting and ending range to block multiple
addresses.
Add/Delete Once you have entered a range, you may add the range to either list using the Add
buttons. If you want to remove an address from a list, highlight it and click the Delete button.
Apply to All Playback Servers Click this button to apply all settings on this page to all other
network servers.
3.15.3 Performance Tab
Black List
Add/Delete
Apply to All Playback Servers
White List IP Field
Fig. 75. Performance tab in Network Service window
Total Bitrate This shows you the total amount of data being transmitted by all connections. This is
a useful tool to determine the amount of bandwidth being used by the live streaming server.
Individual Camera Bitrate This shows the amount of data being transmitted for the first camera
only. Since all cameras divide bandwidth equally, this can show you how much bandwidth is being
used for each camera.
Log Viewer This will show you the times and dates that users login and view specific cameras.
3.16 Remote Playback Server
The remote playback server is the service which controls a remote user’s ability to connect and view
previously recorded videos from the video cameras. A system administrator can configure the service
to limit the number of concurrent connections, to ban people from viewing past recordings, or to
restrict access to only a few users.