EZWatch Pro 4.0 - Manual (Page 35)

34 | Page Software User Manual
Insert Click on the Insert icon to obtain the IP/Video Server Setting window and add IP cameras to
the list. Refer to the next section for details.
Network Enter the required network information including Name, IP Address, HTTP Port, User
Name, Password, and Protocol referring to the instructions provided by the camera manufacturer.
If you connect to the camera using a domain name (Such as EZWatchIP) check the 'Use DNS' box to
type in the name instead of an IP address.
► Note For more information regarding the EZWatchIP DNS service, please
refer to 4.4 How To Set Up Internet Access Using EZWatchIP on Pg. 107.
Device You can specify the make and model of the IP camera from the option boxes here, or you
can have the software attempt to auto-detect the make and model. For auto-detect to function,
you must AT LEAST have the IP address or DNS name of the camera entered into the Network
settings.
Description Displays video codec information of the IP camera selected.
Delete Click on the Delete button to remove the selected IP camera(s) from the system. Click 'OK'
to finalize the modification.
Config Click on the Config button to obtain the IP/Video Server Setting panel. You can modify the
IP camera settings with the Setting window. Refer to the next section for details.
► Note Once an IP Camera is connected to the Main Console, all other
camera configuration settings similar to an Analog Camera can be
applied.
3.6.3 Input/Output (I/O) Device Configuration
Module Setting
Device List Digital Input Monitors
Fig. 47. I/O Device tab of Setting window
Module Setting Any connected I/O Modules installed will appear in this list. The 'Module' column
shows the name of the module, while the 'Device' column shows what specific module it is.