EZWatch Pro 3.0 - Manual (Page 39)

39
non-real time viewing the Video Tools shown, the functions as Fig 5-16 will work. (This
function will be enabled when system install the RD-1600VGA and RD-800VGA only.)
• Focus/Zoom/IRIS: click on or of Fig. 5-15 to adjust the parameters of PTZ camera.
Fig. 5-15 Fig. 5-16
• Video Tools: Right click your mouse on the video screen that you could modify the
parameters of image. Please see Fig. 5-16.
Hide video makes the given camera’s images on your monitor disappear; however all of its
other functions keep working. For example, if you select this, the chosen camera’s window
section in Witness XP will turn blank, but the camera itself can still continue to record.
Clear will clear the red border. Upon detection, the image from the camera that detected it
will pop up. Upon multiple detections, the newest detection will pop up. However, you will
not lose track of which cameras detected movement, because once you minimize the popped
up window, you will see that every camera that detected movement will have a red border.
Once you finish viewing, you can clear the red border by right clicking on the appropriate
camera and hitting the “Clear”.
Adjust Image Colors Right click on the video screen, and you will be able to adjust
brightness, contrast, saturation, hue and zoom.
: This function is designed to zoom in (amplify) the video display image. After
you have screen zoomed in, you can navigate the viewing area by holding down
the left mouse key on the screen.