12. using dynamic ip addresses for internet access – EZWatch Pro 3.0 User Manual
Page 64
64
6-12. Using Dynamic IP Addresses for Internet Access
The main function of “ID code” is to solve possible problems with connections having dynamic IP
addresses. Witness XP has a built-in IP address register function. If you enter the ID code into
Witness XP and enable the “ID Identify Server” function, then when you start Witness XP, its
built-in IP Identify capability allows others to connect directly to your Witness Video Server from
their FreeView Pro software via the Internet. In cases where you do not have a fixed IP address
assigned to your computer, the ID Code may use the local site to redirect browsers to your computer
by announcing its current IP address to the IP Identify Server.
•
Set ID code login by doing the following:
Step 1:
Click
in the Tool bar for network configuration.
Step 2:
Enter an “ID code”.
Step 3:
Enable “Auto connect to IP identify server”.