EZWatch Pro 3.0 - Manual (Page 53)

53
2. Select “Special Period”, and then select a “Start time” and an “End Time”.
3. Select a “Start date” and an “End date”.
4. Click “Add” to finish.
Note: If the time set runs over two days, set them separately. For example if your recording time is
from 5:00pm to 7:30am of next day, you should set it as two segments: 7:00 to 23:59 and
00:00 to 7:30.
When you set schedules of sequential recording and motion detection recording, please do
not schedule overlapping periods. Overlapped periods will be executed improperly. Ex.
Sequential recording is scheduled between 3:00 and 5:00 and motion detection recording is
from 4:00 to 7:00. Because of overlap, Witness XP will only execute sequential recording
from 4:00 to 5:00 and motion detention from 5:01 to 7:00.