Flex TPO Для дома - Manual (Page 32)

Hand Welder Operation
The hand welder is generally utilized for flashing details and field seams
less than 10’ in length. Consult the welding machine manufacturer’s
recommendations for proper temperature setting for the equipment.
The temperature setting will vary with ambient temperature, type of
substrate and membrane thickness.
As a general guide for welding the Flex TPO Plus Membrane the Leister
Triac Hand Welder suggested starting setting is # 6. Start the Flex
Leister welder and allow it to run for a few minutes to warm up.
Insert the nozzle of the welder between the 2 sheets of membrane
holding the welder in one hand and the silicon roller in the opposite
hand.
Slide the welder along the seam while simultaneously applying pressure
rolling with hand welder to the outside edge of the seam.
The roller must be placed flat against the membrane to be welded.
Do not turn the roller on edge when welding the membrane.
Hot air welding with a hand held tool
32