BT Response 15+ - Manual (Page 12)

4th Edition – 13.10.98
To set
the volume
The message playback
volume can be set to a
level suitable for you.
Press + to increase
the volume.
Press - to decrease
the volume.
As you press, a beep
sounds at the level
you are selecting.
When the volume is at
its highest or lowest
you will hear 2 beeps.
The Response 15 has
a pre-recorded
outgoing message
which announces…
You can record your
own outgoing message
to replace the pre-
recorded message.
If you record your
own message, the pre-
recorded message will
be automatically
removed and stored in
the memory, in case
you wish to reinstate it.
Your Response 15 has a
total recording capacity
of 14 minutes. Any
outgoing message you
record can be up to 2
minutes long, but you
should keep it short to
allow more time for
recording incoming calls.
Using your
Response 15
volume +
Beep!
If you alter the volume
during playback of a
message, the beep does
not sound but the volume
will change accordingly.
If the volume is below
mid-volume, it will
automatically return to
the mid-volume setting
when any buttons are
pressed (for example, if a
message is played back).
The volume is unaffected
during remote access or
call screening.
To record your
outgoing message
The outgoing
message is the
message a caller hears
when your Response
15 answers a call.
8
2
1
Hello, your call cannot
be taken at the moment, so please
leave your message after the tone.