BT Response 15+ - Manual (Page 20)

4th Edition – 13.10.98
16
Remote access
You can turn your
Response 15 answering
machine on, and listen
to your messages from
any Touchtone
™
telephone. To protect
your privacy, messages
can only be accessed
by keying in your 2
digit security code.
For your security code,
look inside your
Response 15’s speaker
cover. (You cannot
change the security
code.)
To check for
messages
Dial your phone
number and wait.
When you hear your
outgoing message,
press the ✱. You will
hear 2 beeps.
Key in the first digit of
your security code.
You will hear a beep.
Key in the second digit
of your security code.
If you have no
messages, you will
hear…
…and your Response
15 will disconnect the
line.
You have no messages.
Thankyou for calling.
1
2
3
4
If you have messages,
you will hear…
Your Response 15
will then play your
messages, with the
day and time they
were recorded.
If you hear 4 short beeps,
it means you have
entered the wrong security
code and are invited to
try again. Do not
re-enter
✱
.
If you take more than
8 seconds to enter a
number, the Response
15 will announce
‘Thank you for calling’
and disconnect the line.
You have x messages.