BT Response 15+ - Manual (Page 16)

Press and hold the
ANSWER ON/OFF
button. Your Response
15 will announce the
current answer delay.
Keep holding the
ANSWER ON/OFF
button. Your Response
15 will announce the
answer delay
options...
When you hear your
desired setting,
release the
ANSWER
ON/OFF button. After
2 seconds your
Response 15 will
announce the new
answer delay setting
and then return to
‘answer on’ mode.
Two minutes is the
maximum time allowed
for each incoming
message. If the maximum
message length is reached,
your Response 15 will
announce, ‘ Thank you
for calling’ and
disconnect the line. If the
memory is full then it will
announce. ‘Memory full,
thank you for calling’
and disconnect the line.
Your Response 15 can
record up to a total
recording time of 14
minutes. If the memory
capacity is full, the LED
display will flash rapidly
and your answering
machine will not record
further messages.
To play back
a message
Press the PLAY
button. Your Response
15 will announce...
12
You have x
messages.
Message one.
play
memo
skip
1
Time Saver, 2, 3,
4, 5, 6, 7, 8, 9
Answer delay,
4 rings
2
3
Time Saver
4th Edition – 13.10.98
answer
on/off
skip
answer
on/off
skip
answer
on/off
skip
To check the answer
delay setting
Press and hold the
ANSWER ON/OFF
button. Your Response
15 will announce the
current delay setting.
To receive incoming
messages
Your Response 15 will
automatically record
an incoming message
when it is connected
to your phone socket
and is set to ‘answer on’.
When your Response
15 has received new
messages, the display
LED will flash.
answer
on/off
skip