Garland US RANGE UT SERIES HEAVY DUTY GAS COUNTER EQUIPMENT - Manual (Page 8)

Page 8
SPECIFICATIONS: GRIDDLES
2.0" 7.6"
WIDTH
16.3"
4.0"
1.7"
32.1"
4.0"
4.0"
25.9"
13.0"
15.8"
20.5"
23.0"
3.8"
0.8"
5.3"
(51mm)
CORD
OPT.ELEC.IGN.
(21mm)
(584mm)
(98mm)
OPT.ELEC.IGN.
CORD
GAS INLET W/REGULATOR
STRAIGHT (STD) OR FLUSH REAR
TROUGH DEPTH
(43mm)
(192mm)
(43mm)
(814mm)
(102mm)
(102mm)
(102mm)
(415mm)
(402mm)
(330mm)
(521mm)
(657mm)
(136mm)
GAS
INLET
1.7"
For use with Natural or Propane gas only.
Gas input ratings shown for installations up
to 2000 ft., (610m), above sea level. Please
specify altitudes over 2000 ft. and gas type
required when ordering.
Garland/U.S. Range products are not
approved or authorized for home or
residential use, but are intended for
commercial applications only. Garland / U.S.
Range will not provide service, warranty,
maintenance or support of any kind other
than in commercial applications.
* Please add 7” (178mm) in overall depth
with attachment condiment rail option .
Part # 4531352 Rev 2 (09/09/13)
Model #
Width
In (mm)
Height
(w/std legs)
Depth
In (mm)
Total
Input (BTU)
Shipping
Information
Lbs/Kg Cu Ft
Thermostat Controlled Standard Griddle (1" steel plate)
UTGG24-GT24M 23-5/8 (600)
13 (330) 32 (814)
56,000 290/132 21
UTGG36-GT36M 35-7/16 (900) 84,000 405/184 29
UTGG48-GT48M 47-1/4 (1200) 112,000 595/270 37
UTGG60-GT60M 59-1/16 (1500) 140,000 705/320 42
UTGG72-GT72M 70-7/8 (1800) 168,000 810/368 50
Manually Controlled Standard Griddle (1" steel plate)
UTGG24-G24M 23-5/8 (600)
13 (330) 32 (814)
54,000 280/127 21
UTGG36-G36M 35-7/16 (900) 81,000 395/180 29
UTGG48-G48M 47-1/4 (1200) 108,000 585/266 37
UTGG60-G60M 59-1/16 (1500) 135,000 688/313 42
UTGG72-G72M 70-7/8 (1800) 162,000 790/359 50
SUPPLY OPERATING PRESSURE MANIFOLD OPERATING PRESSURE CLEARANCES
NATURAL GAS PROPANE NATURAL GAS PROPANE INSTALLATION TO COMBUSTIBLE
"WC MBar "WC Mbar "WC MBar "WC Mbar Sides Rear
7 17.5 11 27.5 4.5 11 10 24.5 6" (152mm) 6” (152mm)