General Machine Products 70524 Adams CD3 Continuous Duty Winch - Manual (Page 28)

AK 7/18/2012 ver 5
GMP LIMITED WARRANTY
1a. General Machine Products Co., Inc. ("GMP") warrants to the purchaser and/or end user:
(1) that a new product sold and manufactured by GMP will be free from original defects
in material and workmanship for one year from the date the product was delivered to the
purchaser and/or end user, or for the lifetime of the Modular Plug Presser;
(2) that a new product sold and not manufactured by GMP will be covered exclusively
by the manufacturer's warranty. However, if that warranty coverage shall provide less
coverage than the GMP Warranty for its manufactured products, then the warranty set
forth in Paragraph 1(a) above shall apply instead;
(3) that a reconditioned used GMP product sold by GMP, or a non-owned product re
paired by GMP, or a new part sold by GMP, will be free from original defects in
material and workmanship for ninety days from the date the product was delivered to
the purchaser and/or end user.
1b. The above warranties are contingent upon and subject to the condition that: (1) the end user
substantiates the date it purchased and received delivery of the product or part, and (2) the prod-
uct or part shall have been installed, maintained and used in accordance with GMP's or the
manufacturer's written instructions.
2. The end user shall determine the suitability of GMP's product or part for intended use, and
the end user assumes all risk and liability whatsoever in connection therewith except to the ex-
tent set forth in this Limited Warranty.
3a. GMP reserves the right to request that the product or part be returned to us for examination
and cannot be responsible for user charges incurred in the replacement of any product. GMP's
agreement to repair or replace is also subject to its inspection of the product and verification of
the defect.
3b. Subject to immediate written notification of a defect or malfunction, GMP will repair or re-
place that product or part, at GMP's option, returned freight prepaid to Trevose, PA.
3c. To obtain repair or replacement service under the Limited Warranty, the purchaser must
contact the factory for a Return Material Authorization (RMA). Once obtained, send the RMA
along with the defective part or product, transportation prepaid to:
General Machine Products Co., Inc.
3111 Old Lincoln Highway
Trevose, PA 19053 USA
Tel: 215.357.5500
3d. The field labor and material charges incurred by an authorized GMP dealer or an end user to
disassemble, inspect, repair and reassemble our product or part at their respective prime loca-
tions will not be reimbursed unless GMP has first reviewed and approved those charges.
3e. Incidental repair charges incurred by an authorized dealer or an end user for items such as
labor, transportation, tolls, lodging and meals at a location remote from its prime facility, or to
demount our product or part from its remote location and forward to its prime facility, are not
28