Baracoda 2 - Manual (Page 16)

BaracodaPencil 2 – Communication Protocol v1.3 - 16 -
Data Capture
for Workforce
in Motion
{ number of elements to be uploaded MSB }
{ number of elements to be uploaded LSB }
Response None
Code ID 2
Description Start uploading barcodes
Payload 1 byte:
{0 mandatory}
Response 1 byte:
{Bit 0: Success}
Code ID 3
Description RESERVED
Payload N/A
Response N/A
Code ID 4
Description Set upload status and end process
Payload 2 bytes :
{0 mandatory}
{1 : upload successful, data can be erased from the scanner
0 : upload failed, do not erase data}
Response 1 byte:
{Bit 0: Success}
Code ID 0xD2-0xD3
Description Get/Set Anti duplicate scans
Payload Get : None
Set : 1 byte
{0 = disabled
1 = no consecutive duplicate scans + error signal
2 = no consecutive duplicate scans + no decoding}
Response Get : 1 byte
{0 = disabled
1 = no consecutive duplicate scans + error signal
2 = no consecutive duplicate scans + no decoding }
Set : 1 byte
{(Bit 0:Success)}
Comments The comparison will be made over the 32 first characters of the barcodes only.
Code ID 0xD4-0xD5
Description Restore last batch
Payload None
or 1 byte (optional):