HYDAC HMG 510 - Manual (Page 24)

24
Technical Specifications
Sensor inputs
The HMG 510 features two analog inputs with automatic sensor detection at
2 input jacks (channel A and B).
Only HSI sensors (pressure, temperature or flow rate transmitters) and
SMART sensors (moisture, temperature and flow rate sensors) can be
connected.
Channel A and B:
• Automatic sensor recognition for HSI and SMART sensors; automatic
setting of the measurement range and unit of measurement
• Measured value differential for channel A - B
Measurement accuracy of the input channels:
• ≤ + 0.1% of the measurement range
Sampling rate:
• 0.1 ms
Measurement & display:
• Current measured value
• Min/max values
• Measured value differential
• Change of the unit of measurement
Dimensions and weight:
• Measurements: 100 x 170 x 40 mm
• Weight: 410 g
Operating/ambient conditions:
• Operating temperature: 5 – 60°C
• Storage temperature: - 40 – 70°C
• Relative humidity: 0 – 70 %
Operating time using 9 V battery (2 sensors):
• ca. 10 hours
Standards with Which the HMG 510 Complies
• EMC: EN 61326-1+A1+A2
• Safety: EN 61010
• Protection rating: IP 54