HYDAC HMG 510 - Manual (Page 11)

11
The time period always begins
when the min/max values are
reset. Resetting the values is
prompted by the following
situations:
• Switching the unit on
• Pressing the Reset button
• Connecting or disconnecting an
HSI sensor
To access the min or max value
display, press the Min/Max key:
• press 1 x: Minimum value
• press 2 x: Maximum value
• press 3 x: Back to measured
value display.
Note that in the measured value
display, only the minimum or
maximum value for both channels
A and B are shown together.
To reset the min/max values, press
the Reset button.