BOXLIGHT XD-5m User Manual
Page 16
8
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
Do you want to control the computer’s mouse from the projector’s
remote or keypad?
If your computer has a PS/2 connector, use the PS/2 mouse cable.
1
Plug the end of the PS/2 mouse cable with 6 pins into the
mouse connector on your computer.
2
Plug the end of the PS/2 mouse cable with 8 pins into the
connector on the projector.
If your computer has a USB connector and is running Windows 98,
use the USB mouse cable.
NOTE: The USB mouse is
supported for use with
Windows 98 only.
1
Plug the
end of the USB mouse cable into the
mouse connector on your computer.
2
Plug the
end of the USB mouse cable into the
connector
on the projector.
You must have the appropriate USB drivers installed on your
computer to use the USB feature. Windows 98 ships with the
appropriate drivers.
Now you’re ready to power up the projector and your laptop.
Skip to “Powering up the Projector and Adjusting the Image” on
page 11.
NOTE: You do not need to restart
your computer after connecting a
USB mouse to use it (it is hot-
pluggable). You must restart your
computer after plugging in a PS-2
mouse.