BOXLIGHT XD-5m - Manual (Page 36)

28
M a i n t e n a n c e & T r o u b l e s h o o t i n g
4 Pull the lamp door up and remove it.
WARNING: Be extremely careful
when removing the lamp module.
In the unlikely event that the bulb
ruptures, small glass fragments
may be generated. The lamp
module is designed to contain
these fragments, but use caution
when removing the lamp module.
F IGURE 19
Removing the lamp door
CAUTION: Never operate the
projector with the lamp door open
or removed. This disrupts the air
flow and causes the projector to
overheat.
5 Loosen the two non-removable screws on the outside of the
module.
F IGURE 20
Loosening the screws on the lamp module