BOXLIGHT XD-5m - Manual (Page 29)

21
Image Menu
F IGURE 15
Image menu
Auto Image
NOTE: Some screen savers inter-
fere with the operation of Auto
Image. If you’re experiencing prob-
lems, try turning your screen saver
off, then turning Auto Image off
and back on.
The projector automatically adjusts tracking, signal synchroniza-
tion and vertical and horizontal position for most computers
(Auto Image does not apply to video sources). If you want to
adjust these features manually, you must turn off
Auto Image first
by highlighting Auto Image in the Image menu and clicking the
left or right navigation button to select “off”.
Auto Resize
Auto Resize automatically resizes the image by scaling it up. It
only affects computer images that are not the projector’s native
resolution.
When Auto Resize is on, the projector makes the best fit of the
image to the screen. If you turn Auto Resize off (by highlighting it
in the Image menu and clicking the left or right navigation button
to select “off”), the image may be either cropped or too small for
the screen.
Manual Sync
The projector adjusts signal synchronization automatically for
most computers. But if the projected computer image looks fuzzy
or streaked, try turning
Auto Image off then back on again. If the
image still looks bad, try adjusting the signal synchronization
manually: