BOXLIGHT XD-5m - Manual (Page 25)

17
Standby
When you press standby , the display and audio turn off and a
blank screen is displayed for 15 minutes. You can change the
amount of time the projector stays in standby mode; see
“Standby Time” on page 23 for details.
• If you press standby again within 15 minutes, the projector
returns to normal operations immediately.
• If you press standby again after 15 minutes, there is about a
60 second delay before the lamp turns back on.
• If you don’t press standby again, the lamp turns off after 15
minutes.
Volume (keypad only)
To increase the volume, press volume + . To decrease the vol-
ume, press volume - .
Volume adjustments are saved for each source you have con-
nected.