INFICON STC-2000A Thin Film Deposition Controller Quick Start Guide, Non-sequencing User Manual
Page 6
STC-2000A Quick Start Guide
Sycon Instruments, Inc
.
6
6757 Kinne Street
• East Syracuse, New York 13057-1215 • (315) 463-5297 • Fax (315) 463-5298
instruments
To switch from Sequencing to Non-sequencing or vice-versa:
Press the fixed “Menu” button to view the Menu screen.
Press “Service” on the touchscreen to view the Service menu.
Non-sequencing: Sequencing:
Press to toggle
Press “Accept” on the touchscreen to accept the change. The STC-2000A will automatically
restart after the change is accepted. (Note: “Accept” button appears only for a status change.)
To switch to or from Test Mode:
Press the fixed “Menu” button to view the Menu screen.
Press “Service” on the touchscreen to view the Service menu.
Press to toggle
Press “Accept” on the touchscreen to accept the change. The STC-2000A will automatically
restart after the change is accepted. (Note: Turning the unit off clears Test mode.)