INFICON XTC/3 Thin Film Deposition Controller Communications Library Operating Manual - Manual (Page 81)

1 - 67
IP
N 07
4-
45
4-
P1
B
XTC/3 Communications Library Operating Manual
1.3.2.36.2 setRemSetPwrVV
int setRemSetPwrVV (float val, char* ErrMsg, BOOL TCP);
Arguments
float val:
4 byte float that sets the % power for the active layer.
char* ErrMsg
BOOL TCP
Example
#include "XTC3Lib.h"
void main()
{
if(StartSocket()==0)
printf("Socket could not be initialized.");
if(!ConnectSocket("10.211.70.209"))
printf("Socket could not be connected!");
char ErrStr[256];
memset(ErrStr,0,256);
unsigned short len = 0;
setRemSetPwrVV (.045F, ErrStr, TRUE); // setting the power for
// the active layer to 0.045%
setRemTurnBacklightOff( ErrStr, TRUE);
if(*ErrStr == 0)
printf("Data Transfer successful\n");
else
printf(ErrStr);
CloseSocket();
}