27 getall – INFICON XTC/3 Thin Film Deposition Controller Communications Library Operating Manual User Manual
Page 55
1 - 41
IP
N 07
4-
45
4-
P1
B
XTC/3 Communications Library Operating Manual
1.3.2.27 getAll
int getAll (XTC3AllData *val, char* ErrMsg, unsigned short *len, BOOL TCP);
Description
This function is used for downloading all the instrument parameters, which are:
General = XTC3_MAX_GEN_PARAM x 4 bytes
Film = NUM_OF_FILMS x MAX_FILM_PARAM x 4 bytes
IOMap = (NUM_OF_RELAYS + NUM_OF_TTLs +
XTC3_NUM_OF_INPUTS) bytes
All Film Names (XTC/3M only): NUM_OF_FILMS x (up to
XTC3_TITLE_LENGTH, null terminator included)
Up to
PART_NUM_OF_PROCESSES
Processes filled each with
(NUM_OF_LAYERS + XTC3_TITLE_LENGTH + 2) x
PART_NUM_OF_PROCESSES
)
NOTE: See command UB1 and QB1 in the User’s Guide document.
The whole packet amounts to a maximum of XTC3_ALL_SIZE bytes.
Arguments
XTC3AllData* val:
This structure is filled with all the instrument parameters (see description
above) which amounts to a maximum of XTC3_ALL_SIZE bytes. The
variable m_Length is a 2 byte short that represents the length of data being
marshaled in the array val->m_Data.
char* ErrMsg
unsigned short *len
BOOL TCP