Intelix FLX-88 v1.6.4 - Manual (Page 10)

FLX-88 Installation Guide
10
Output Cards
The modular output cards are keyed on the left side to line up with the input cards and ensure they are
installed correctly in the matrix.
DVI (FLX-DO4)
The FLX-DO4 DVI-D outputs are HDMI and HDCP compliant and support CEC and DDC standards. Each
output is a single link DVI-D connection that can support video resolutions up to 1920x1200.
HDBaseT (FLX-BO4A)
The FLX-BO4 takes advantage of HDBaseT outputs connect any source device to a remote display, up to
70m away, utilizing standard Cat 6 cable with a TIA-568B crimp. The RS232 connections for each output
allow bi-directional control signals at the equipment rack to interface with display devices when used
with the DIGI-HD60C-R or DIGI-HDE-R HDBaseT receivers. Stereo audio can be de-embedded from the
HDMI signal and output to the 3.5mm TRS connectors. This unit has advanced EDID copy functions that
allow either full or hybrid copy (video with 2ch overwrite) to ensure that the source will emit the correct
format.