Intelix FLX-88 - Manual (Page 10)

FLX-88 Installation Guide
Output Cards
The modular output cards are keyed on the left side to line up with the input cards and ensure
they are installed correctly in the matrix.
DVI (FLX-DO4)
The FLX-DO4 DVI-D outputs are HDMI and HDCP compliant and support CEC and DDC
standards. Each output is a single link DVI-D connection that can support video resolutions up to
1920x1200.
HDBaseT (FLX-BO4A)
The FLX-BO4 takes advantage of HDBaseT outputs connect any source device to a remote
display, up to 70m away, utilizing standard Cat 6 cable with a TIA-568B crimp. The RS232
connections for each output allow bi-directional control signals at the equipment rack to
interface with display devices when used with the DIGI-HD60C-R or DIGI-HDE-R HDBaseT
receivers. Stereo audio can be de-embedded from the HDMI signal and output to the 3.5mm TRS
connectors. This unit has advanced EDID copy functions that allow either full or hybrid copy
(video with 2ch overwrite) to ensure that the source will emit the correct format.
10