Intelix FLX-1616 - Manual (Page 27)

FLX-1616 Installation Guide
FLX-BI4
Technical Specifications
I/O Connections
HDBaseT Port Four (4) 8P8C port (Shielded RJ45)
IR In Four (4) 3.5 mm TS (Requires DIGIB-EYE)
IR Out Four (4) 3.5 mm TRS (Requires DIGIB-EMT)
RS232 Four (4) 3 pole Euroblock Connectors
Supported Audio and Video
Maximum Video Compatibility at 70 m Deep Color 36/30/24 Bit at 1080p
Maximum Video Compatibility at 40 m Deep Color 48 Bit at 1080p, 3D
Video Compliance HDMI and HDCP
Embedded Audio Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master
Audio
HDBaseT Signal Characteristics
Maximum Distance 70 m
Cable Requirements Category 5e, 6, or 6A with TIA/EIA-568B crimp pattern
Bandwidth 10.2 Gbps
Gain 0 dB – 10 dB at 100 MHz
Resolution Range 800x600 – 1920x1200
Signal to Noise Ratio (SNR) > 70 dB at 100 MHz over 100 m
Return Loss < -30 dB at 5 KHz
Total Harmonic Distortion (THD) < 0.005% at 1 KHz
Min-Max Signal Level < 0.3 V – 1.45 Vp-p
Differential Phase Error ±10° at 135 MHz over 100 m
Chassis and Environmental
Construction Plug-in card with keyed black metal plate
Shipping Weight 0.43 kg (0.95 lbs.)
Operating Temperature 0° to +40° C (+32° to +104° F)
Operating Humidity 20% to 90%, Non-condensing
Storage Temperature -10° to +60° C (+14° to +140° F)
Storage Humidity 20% to 90%, Non-condensing
Other
Warranty 2 years
Matrix Switcher Compatibility FLX-8X8A, FLX-1616, FLX-1616, FLX-3232
HDBaseT Transmitter (A/V and Control) Compatibility DIGI-HDE-S, DIGI-HD60C-S
HDBaseT Transmitter (A/V Only) Compatibility DIGI-HD70-S
Infrared (IR) Emitter DIGIB-EMT
Infrared (IR) Receiver DIGIB-EYE
27