Intelix DIGI-P52 - Manual (Page 11)

DIGI-P52 Installation Guide
11
Installation Instructions
Quick Start
Mount the Matrix
Shelf Mounting Instructions
Table Mounting Instructions
1. Mount the matrix
2. Connect sources
3. Connect audio inputs (optional)
4. Connect displays
5. Connect microphone input (optional)
6. Connect audio output (optional)
7. Connect control (optional)
8. Apply power
At least 2 inches of free air space is required on both sides of the DIGI-P52 for proper side ventilation. Avoid
mounting the DIGI-P52 near a power amplifier or any other source of significant heat.
Attach the supplied shelf feet to the bottom of the DIGI-P52.
Attach the supplied mounting rails to the sides of the DIGI-P52.
Once the rails are installed, the scaler is ready to be mounted
under a table.