Intelix DIGI-P52 - Manual (Page 12)

DIGI-P52 Installation Guide
12
Connect Sources
HDMI Inputs
VGA/Analog Video Inputs
Connect the source devices to HDMI inputs using HDMI cables
that are less than or equal to 5 meters in length. For source
devices that are further away, an HDMI extension device will be
required to complete the connection.
Connect the source devices to VGA inputs using VGA cables that
are less than or equal to 5 meters in length. For source devices
that are further away, a VGA extension device will be required
to complete the connection.
Use the supplied adapter cable (FLX-RBOCA) if the source is
an analog video signal such as component or composite video
(yellow connector on source to red connector on FLX-RBOCA).
Connect Audio Inputs (Optional)
If the analog audio inputs are to be used in the installation,
connect the Left, Right, and Ground reference wires to the
removable 3-pole terminal block.
Please see page 21 to configure the analog audio inputs for
HDMI source devices.
Insert the removable 3-pole terminal block to the appropriate
input zone terminal.
L
R
L+
L-
R-
R+