Intelix DIGI-P52 - Manual (Page 23)

DIGI-P52 Installation Guide
23
Sound Menu
Sound Mode
Surround Sound
EQ (Equalizer)
Screen (VGA Only)
Color Range (HDMI Only)
The Sound menu features audio adjustments: sound mode, surround sound, and equalizer (EQ).
Selecting Sound Mode will open another menu which will change the treble and bass levels of the audio
output. The default value is Standard. Values range from 0 to 100. Pressing MENU will exit the submenu.
Standard Music Movie Sports User
Treble 50 Treble 75 Treble 75 Treble 35 Treble 0-100
Bass 50 Base 75 Bass 90 Bass 35 Bass 0-100
Selecting Surround Sound will open another menu which will present options for surround sound output.
Available selections are: Off (stereo audio), Surround (5.1 surround audio), and SRS TruSurround XT (simulated
surround sound). Pressing MENU will exit the submenu.
Selecting EQ will open another menu which will present options to adjust levels using five frequency bands.
Available frequencies are 120Hz, 500Hz, 1.5KHz, 5KHz, and 10KHz where adjustable values range from
0 to 100. Pressing MENU will exit the submenu.
Selecting Screen will open another menu which will adjust the input signal processing to clear up various
analog distortion issues. Auto Adjust will automatically correct for any input signal issues. Manual adjustments
include Horizotal Position, Vertical Position, Size, and Phase where values range from 0 to 100. Pressing MENU
will exit the submenu.
Selecting Color range will cycle between two options: 0-255 (deep color) and 16-235 (standard color).