IPitomy IP400 User Guide - Manual (Page 12)

4
Chapter 4
Setup
This Chapter provides Setup details of the VoIP Gateway
Overview
This chapter describes the setup procedure for configuring the VoIP Gateway from a web
browser.
After changing the settings, the new set-
tings won’t take effect until you save and
reset the VoIP Gateway. Use the Reset
button on the Reset screen.
Configuration Program
The VoIP Gateway contains an HTTP server. This enables you to connect and configure it
by using your Web Browser. Your web browser must support JavaScript. The configu-
ration program has been tested on the following browsers:
•
Netscape V4.08 or later
• Internet Explorer V4 or later
Preparation
Before attempting to configure the VoIP Gateway, please ensure that:
• Your PC can establish a physical connection to network that the VoIP Gateway con-
nects to. The PC and the VoIP Gateway must be on the same LAN segment.
• The VoIP Gateway must be installed and powered ON.
• Ensure that the VoIP Gateway's default IP Address (192.168.0.250) is not used by any
host connecting to the network.
Using your Web Browser
To establish a connection from your PC to the VoIP Gateway:
1. Start your web browser.
2. In the Address box, enter "HTTP://" and the IP Address of the VoIP Gateway, as in this
example, which uses the VoIP Gateway's default IP Address:
http://192.168.0.250
4