JUMO PCA3000 PC Evaluation Software - Manual (Page 75)

75
10 Menu functions and toolbar
Open batch This function also displays measurement data from an archive graphically.
Unlike the Open function, not all the data from an archive will be shown here,
but only those of a specific batch.
Open electronic
signature This function also displays measurement data from an archive graphically.
Unlike the Open function, not all the data from an archive will be shown here,
but only those for which a signature has been executed.
Close Closes a graphical display, but not the PCA3000 program.
Read in data This function reads measurement data from the CompactFlash memory card
into an archive. The procedure has already been described in Chapter 6.2
“Reading in data”.
This type of archiving is intended to achieve the simplest possible assignment
between the CF data files and the archived files. When determining the target
archive, the following sequence has to be observed:
- The device ID and the configuration ID of all data files in the “Folder for data
source” path are determined. In each case, there is only one device ID for
each device. Configuration IDs are provided for each reconfiguration
All activated archives are read in. Position the mouse pointer on the
selection of available archives and press the right mouse button.
You now have further selection options for activating and deactivating
archived files.
If you left-click on
a file name, you can alter it.
Specific archives can be saved to a
separate file in this way.
Select all
files
Cancel
selection